LOGICDATA COMPACT - User Manual

User manual
Control Unit for an Electric
Height-Adjustable Desk
COMPACT
For firmware version 1.7.6 or higher
Rev 3
Subject to change without notice. Errors and omissions excepted.
LOGICDATA cannot accept responsibility for incorrect operation or use of
the products other than for the intended purpose.
Under the warranty terms, LOGICDATA shall replace or repair any products
that prove defective at the time of delivery. LOGICDATA shall not assume
any further liability.
If you have any questions or special requests, please contact LOGICDATA
direct.
2011 LOGICDATA

LOGICDATA COMPACT Specifications

General

Brand	LOGICDATA
Model	COMPACT
Category	Controller
Language	English

Summary

Preface

Intended Use

Control Unit Functionality

Safety Symbols and ISP

Explains safety warning symbols and the Intelligent System Protection (ISP) mechanism.

General Safety Instructions

Outlines essential safety warnings and precautions for the safe operation of the unit.

OEM and Service Safety Notes

COMPACT Installation Instructions

Mounting Procedures

TCO 04 Conform Mounting

Commissioning

COMPACT Sockets Identification

Commissioning Procedure Steps

Step-by-step guide for connecting drives, handswitch, and power supply.

Operating the COMPACT Control Unit

Basic Desktop Movement

Memory Position Management

Features for saving and recalling specific desktop heights using memory keys.

Display Adjustment and Manual Reset

Limit Position Calibration

Calibration process to define the desk's minimum and maximum travel limits.

Software-Controlled Features

Appendix

Faults and Remedies

A guide to diagnosing and resolving common operational faults and errors.

Error Messages and Indicators

Explanation of error codes, LED status lights, and audible click signals.