Logitech G X52 User Manual

14
Changing the mode
You change the mode by rotating the mode selector switch on your ight stick.
Asyoudothis, the MODE number displayed on the MFD changes to reect your selection.
Using additional modes
Three modes are available by default. You can increase this to six using the pinkie switch
on your ight stick. To do this you must designate the pinkie switch to perform the same
function as the Shift key, using the SST programming software. You can then select one
ofthe additional modes by holding down the pinkie switch as you rotate the mode selector
switch. When you do this, the word SHIFT is displayed in the mode section of your MFD.
Within each prole, you can use the following modes:
• Mode 1
• Mode 2
• Mode 3
• Mode 1 + Pinkie
• Mode 2 + Pinkie
• Mode 3 + Pinkie
Viewing the current modeThe mode that is currently selected is displayed in the top part
ofthe MFD. This is shown in the following example:

Logitech G X52 Specifications

General

Brand	Logitech G
Model	X52
Category	Video Game Controller
Language	English