Logitech Harmony Ultimate
46
Remote lock
You can temporarily disable the remote so that you can clean it without accidentally turning on or off any devices.
To lock the remote, tap Settings > Remote > Remote lock. Press and hold the physical Exit button on the remote
control to unlock the remote control for use.
Background
Tap Settings > Remote > Background and use one of the standard background images that come with the
Harmony Ultimate remote, or upload one of your own as described in Customizing your background picture.
Brightness
Tap Settings > Remote > Timeout and use the sliding controls to brighten or dim the remote control screen and
the button backlighting.
TIP: To extend remote battery time between charges, set the screen and backlight brightness to a
lower value.
Timeout
Tap Settings > Remote > Timeout and use the sliding control to lengthen or shorten the time after which your
remote screen goes dark.
TIP: To extend remote battery time between charges, set the timeout to a lower value.
Set time
The remote control should automatically be set to the correct time. If for any reason you want to change the time
on the remote, follow these steps:
1. Tap Settings > Remote > Set time.
2. Tap on the number you want to change.
3. Use the slider to change the highlighted number.
4. Tap Done.
To change from an AM/PM clock to a 24-hour clock, follow these steps:
1. Tap Settings > Remote > Set time.
2. Slide your finger across the switch to change the 24-hour clock from off to on.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
