Logitech Harmony Ultimate
53
4. Select the Remote only option.
Once you have set up your remote like
this, the remote will prompt you to keep
it pointed at your devices until it finishes
sending commands.
There is electrical
interference from
Wi-Fi, Bluetooth, a
microwave oven, a
cordless telephone,
or some other
device.
Turn off power to possible sources of
interference and try again.
The incorrect
manufacturer or
model number was
entered for the
device
Verify the manufacturer and model
number to make sure it is correct in your
Harmony setup.
Wi-Fi problems
If you are having trouble getting your Harmony Ultimate to communicate with your Wi-Fi network, please read the
Harmony Ultimate Not Able to Connect to Wi-Fi FAQ.
Add missing commands to your Harmony Ultimate
If your remote control buttons are not working properly, you can teach functions to the buttons individually using
MyHarmony. For more information, see Customizing buttons and on-screen commands.
Harmony Ultimate is not detected by my computer
If you’ve connected your Harmony Ultimate but it does not appear to be connected, try the following steps. After
each step, try plugging in the device again.
1. Ensure that the USB cable is plugged into your computer and into your Harmony Ultimate. While it will
successfully be able to charge, the Harmony Ultimate will not be detected when connected to your
computer through the charging cradle.
2. Ensure that you are not connecting through a USB hub. If you are, connect the cable directly to a
computer USB port.
3. Unplug the USB cable from your computer, and plug it in again. Unplug the USB cable from your
Harmony device, and plug it in again.
4. Restart your remote by holding the Off button pressed for 15 seconds
5. Completely close your browser, start your browser again, and return to MyHarmony.
6. Plug the USB cable into a different USB port of your computer.
7. Disable any anti-virus, firewall, or pop-up blocker programs.
8. Restart your computer.
9. Try using a different computer to connect the Harmony device.
Devices do not respond to Harmony Ultimate
There are a number of reasons why Harmony Ultimate may not be able to control your devices after setup. The
latest information about solving this problem is available online in the support article Harmony Ultimate Activity not
working.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
