logitrans LOGIFLEX SELF MAXI - Load Capacity Markings and Diagrams

- 11 -
Specic to Logiex Maxi - with load limitation at
signicant lifting heights
- The fork bracket loading is dependent on the lifting
height and can be read on the load diagram.
-Loadlimitationatsignicantheightsisincorporated
to give greater stacker stability and operator safety.
NOTE! IftheLogiexMaxiisequippedwithoptional
extras, the load limitation of the optional
extras will be valid.
The mast lifting capacity and the corresponding centre of gra-
vity distance are given by the pictogram on the side
of the mast.
The lifting capacity of the mast is the same as the max. lifting
capacity of the product.
Max. lifting capacity is set on the safety valve of the product.
4.0 Optimum safety
4.1 Marking