EasyManua.ls Logo

logitrans LOGIFLEX SELF1003 - User Manual

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LOGIFLEX
SELF1003/SELFS1003
Question and Answer IconNeed help?

Do you have a question about the logitrans LOGIFLEX SELF1003 and is the answer not in the manual?

Summary

EU Declaration of Conformance

Before First Lift

Functions and Identifications

Operating the Logiflex

Handling of Pallets

Instructions for proper operation and fork lifting height before mast extension.

Using the Logiflex

Steps to activate the stacker by inserting the key and turning it clockwise.

Handle Functions

Control functions located in the handle, dependent on handle position.

Multiflex Function

Enables driving with handle upright and braked; requires two-handed operation for confined areas.

Safety Switch Operation

Prevents operator trapping when reversed; activates forward movement when touched.

Battery Information Display

Information shown on the display: battery state, operating hours, fault codes, and LEDs.

Optimum Safety

Safety Regulations

Essential rules for safe operation, including load handling, floor conditions, and chain checks.

Machine Marking and Load Limits

Explanation of mast lifting capacity markings and load limitation diagrams for stability.

Transporting with Load

Guidelines for load center, driving speed, floor conditions, and fork height during transport.

Avoiding Overloads

Rules against exceeding maximum load and considerations for load distribution.

Emergency Stop Function

How to activate and deactivate the emergency stop, and its immediate effects.

Personal Safety

Prohibition against transporting or lifting persons using the stacker.

Power Supply and Fuses

Fuse Replacement

Details on the location and types of fuses and the procedure for replacement.

Wiring Connections

Importance of checking for damage or bad connections to prevent operational disturbances.

Maintaining the Logiflex

Lubrication and Hydraulic Oil

Information on lubrication requirements, hydraulic oil type (ISO VG 15), and additives.

Hydraulic Oil Change

Step-by-step procedure for draining and refilling hydraulic oil, including oil quantities.

Hydraulic Pump Operation

Details on the hydraulic pump's duty cycle (S3 10%) and bleeding the hydraulic system.

Fork Adjustment

Procedure for adjusting fork rollers using eccentric pins for uniform loading.

Lifting Chain Adjustment

Guidelines for adjusting chains to ensure equal lifting and tightness, and proper stopping points.

Side Play Adjustment

Procedure for adjusting side play of the mast carriage using screws and counter nuts.

Cleaning Procedures

Instructions for cleaning the stacker, including warnings about water jets and cleaning agents.

Fault Codes and Troubleshooting

Fault Codes - Battery Info Display

List of error codes displayed on the battery information screen and their solutions.

Fault Location Key

A guide to diagnose issues based on symptoms and observations before contacting the dealer.

Troubleshooting Remedies

Detailed steps to resolve specific faults, including checks on key, battery, fuses, and oil.

Service and After-Sales

Ordering Spare Parts

Information required when ordering spare parts, including product serial number and part number.

Warranty and Compensation

Process for invoicing spare parts during warranty and receiving credit notes for tested defective parts.

Service and Repair

Guidance on performing minor repairs on-site versus major repairs by trained dealers.

Warranty Terms

Details covered by warranty, exclusions (wear, misuse, unauthorized parts), and service check requirements.

Liability Exemption

Manufacturer's disclaimer for personal injury or material damage from improper usage or defects.

Periodic Service and Safety Inspection

logitrans LOGIFLEX SELF1003 Specifications

General IconGeneral
Load capacity (kg)1000
Lifting height (mm)3000
Power TypeElectric
Battery Voltage24V
Travel Speed6 km/h

Related product manuals