EasyManua.ls Logo

logitrans LOGIFLEX SELF1003 - Transporting with Load; Avoiding Overloads

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
4.3 Transport with load
The load centre is never allowed to exceed the center line of the wheels.
The driving speed is reduced when lifting the forks above 400 mm.
The Logiex is designed for use on even and level oor. During transport the forks
shall be raised as little as possible. Transport with raised forks should be made
over the shortest possible distances and at low speed.
4.4 Avoid overloads
The maximum load must not be exceeded.
Remember, the stacker is designed for evenly distributed load;
- goods on pallets etc.
If the forks are point-loaded on one side, there is a risk of bending.
4.0 Optimum safety

Related product manuals