logitrans LOGIFLEX SELF1003 - Faults; State of Operation Leds

13
Green LED Yellow LED Red LED
3.4.3 Faults
If a fault is present, the red LED, the message ”FAULT” and the Wrench symbol will
be ashing and the fault number is showed in the upper 3-digit eld.
(See point 7.1 for Fault code description)
3.4.4 State of operation LED’s
The LED’s indicate the state of operation:
• Green - Normal operation
• Yellow - Warning state, low battery
- less than 30%
• Red - Warning state, low battery
- less than 15%
• Flashing Red - Fault/error state/battery too low
3.0 How to operate Logiex