EasyManua.ls Logo

logitrans LOGIFLEX SELF MAXI - Hydraulic Pump and Cleaning

logitrans LOGIFLEX SELF MAXI
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 17 -
6.3 The hydraulic pump
ThehydraulicpumphasaS3“periodicintermittentduty”of10%.Thismeansthat
the pump in total is allowed to operate 1 minute for a period of 10 minutes.
Note! If the pump operates more than 10%, the motor will be damaged due to
superheating.
Bleeding the hydraulic system
With a load of 50-100 kg, the forks must be raised and lowered to top and bottom
position 2-3 times.
6.4 Cleaning
WhencleaningtheLogiexMaxi,donotdirectthejetontobearingsand
seals
.
Otherwise the grease will be washed out and the life of the equipment
shortened.
Cleaning of the plastic screen (polycarbonate)
The screen is to be washed with slightly warm water added a neutral cleaning
material, and afterwards washed with clean water.
Use a soft sponge, a woollen cloth or a wash leather.
6.0 Long live Logiflex Maxi...
Never use sharp objects or
solvent cleaners when cleaning.

Related product manuals