13
3.3.2 The safety switch
The safety switch on the end of the handle ensures that the operator cannot be
trapped when the Rotator is reversed.
When the safety switch is activated, the stacker will change direction, move
forwards and stop.
Multiex-function
• This function makes it possible to drive the Rotator, even though the handle is
in its upright, braked position (B)
• The function requires two-handed operation, i.e. it must be performed deliberately
• The function facilitates manoeuvring in conned areas.
3.3.1 Multiex-function
3.0 How to operate the Rotator
To Next Page
Loading...
