32
AA
B
Never use sharp objects or
solvent cleaners when cleaning.
Lubrication
Support block
To support the thrust ring, two support blocks (A) are placed behind the ring.
The blocks have to press on the ring, and the back of the ring (B) has to be
lubricated with grease, so that the blocks slide smoothly.
Chains
The chains of the Rotator have to be lubricated with grease twice a year.
6.8 Claning
When cleaning the Rotator, do not direct the jet onto bearings and
seals. Otherwise the grease will be washed out and the life of the
equipment shortened. Avoid spraying directly with liquids on the handle
and other electrical components.
Cleaning of the plastic screen (polycarbonate)
The screen is to be washed with slightly warm water added a neutral cleaning
material, and afterwards washed with clean water.
Use a soft sponge, a woollen cloth or a wash leather.
6.0 Long live the Rotator
To Next Page
Loading...
