19
Green LED Yellow LED Red LED
3.7.2 Machine operating hours
3 dierent operating hours are being logged:
• ”TOTAL/KEY ON” hours - the total hours with power on the truck.
• ”TRACTION” hours - the hours the traction motor has been in operation.
• ”PUMP” hours - the hours the hydraulic pump has been in operation.
Under normal operation the total hours (”TOTAL”) are displayed in
the lower 6-digit eld.
If the Forward/Reverse switch is activated shortly - the traction hours (”TRAC”)
will be displayed.
If the Lift/Lower switch is activated shortly - the pump hours (”PUMP”) will be
displayed.
3.7.3 Faults
If a fault is present, the red LED, the message ”FAULT” and the Wrench symbol will
be ashing and the fault number is showed in the upper 3-digit eld.
(See point 7.1 for Fault code description)
3.7.4 State of operation LED’s
The LED’s indicate the state of operation:
• Green - Normal operation
• Yellow - Warning state, low battery - less than 30%
• Red - Warning state, low battery - less than 15%
• Flashing Red - Fault/error state/battery too low
3.0 How to operate the Rotator
To Next Page
Loading...
