LogTag UTRIX-16 - UTRIX-16(M) Factory Presets

UTRIX-16(M) Factory Presets
LogTag
®
UTRIX-16(M) recorders can be client configured using LogTag
®
Analyzer. For an out-of-box solution they can also be ordered in volume,
pre-configured with a factory profile, ready for starting.
If a default configuration does not suit, customers can compile their own profile by specifying the parameters in the tables below when ordering.
Please note that minimum order quantities apply for UTRIX-16(M) recorders with profiles not stocked by LogTag
®
Recorders .
Description Default Profile Range/Option Your requirement
Profile Name 
Standard Options
UserID - ASCII text up to 38 characters
1
-
Start method Push button start Push button start Push button start
Record pre-start readings enabled enabled or disabled
Number of readings to record 8,000 1-16,129
Sampling interval 5 minutes 1 minute to 18 hours
Start Delay 60 minutes 1 minute to 72 hours, 0=no delay
Enable Green OK indicator enabled enabled or disabled
Reset alarm with START/Mark button
disabled enabled or disabled
Alarm remains active when readings return to spec enabled enabled or disabled
Configure requires password disabled enabled or disabled
Download requires password disabled enabled or disabled
Password - Up to 6 ASCII characters
Advanced Options
Generate PDF file enabled enabled or disabled
Generate LTD file enabled enabled or disabled
Generate CSV file disabled enabled or disabled
Temperature units °C °C or °F
Time Zone UTC +0:00 -12:00 to +14:00 in 15min steps
Time format 24-hour 24-hour or 12 hour (am/pm)
Date format DD/MM/YY DD/MM/YY or MM/DD/YY
Calculate MKT enabled enabled or disabled
Activation Energy default default or custom value (please specify)
PDF Options
Generate Data List enabled enabled or disabled
Y-Axis scaling
Range range of readings range of readings, range of sensor or custom
Custom upper
2
- -25°C to 60°C (-13°F to 140°F)
Custom lower - -25°C to 60°C (-13°F to 140°F)
Show Y-axis grid lines enabled enabled or disabled
Show X-axis grid lines enabled enabled or disabled
Show upper alarm line disabled enabled or disabled
Show lower alarm line disabled enabled or disabled
Allow stopping with STOP button
enabled enabled or disabled
Prioritise download over file generation disabled enabled or disabled
1
All units associated with a profile must have the same UserID. The text cannot be individually customised per unit. The text cannot contain characters from an extended character set
such as Chinese or Cyrillic
2
Upper value must be above lower value
Page 14 of 16 UTRIX-16(M) Product User Guide, Revision 2.0, copyright © 2004-2016, LogTag
®
Recorders . All rights reserved.