LONCIN LC3500i - Motor Parts

Chapter IV Disassembly & Repair
- 43 -
4-5-4 Motor parts
a. Disassembly/assembly
Motor rotor
Fan of motor
Assembly:
Wipe the dust or oil on
crankshaft or the conic
portion and then
conduct assembly.
Engine
Disassembly:
Make use of the disassembly
thread on rotor and assemble
proper rotor remover (a special
tool) to disassemble.
Motor stator
Fan cover
Starting board
Ignition coil
Flange bolt M8 × 28
torque: (30 ~ 36) N•m
Bolt M6 × 65 (4)
Torque: (7~13) N•m
Assembly/disassembly:
Check whether the insulated part is
cracked or damaged prior to
assembly to avoid electric leakage.