Chapter IV Disassembly & Repair
- 52 -
Parallel terminal
The parallel terminal ① is used to connect the
two special LC3500i cables under parallel operation.
Parallel operation requires two LC3500i equipment and
special cable. (The rated output power of parallel
operation is 6 KVA, the rated current of 100 V generator
is 60 A, the rated current of 120V generator is 50A and
the rated current of 230 V generator is 26 A.)
Operation program and related precautions are detailed
in the part of parallel cable system. For related matters
about parallel cable system, please consult Loncin
dealer.
To Next Page
Loading...
Need help?
General
