EasyManua.ls Logo

Lonking CDM307 - Page 58

Lonking CDM307
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER III MACHINE OPERATION
52
Warning
:
The cutting edge and teeth of bucket may run into frozen or buried objects such as rocks
while shoveling. Check and mark before the operation, keep the bucket flat with the ground, avoiding
obstacles, and also not too fast.
3.7.2.2 Operating on the hillside or slope
Warning:
Operating on the hillside is more dangerous, and should pay attention to the ground
situation, rain, snow, ice, loose gravel or soft soil, making the situation complicated. Make accurate
judgments about the safety of operation on hillside or slope.
Warning:
Must be very careful while operating on the hillside, do not let the Skid Steer Loader to
be close to the mountain edge, the loader may easily tip over.
3.7.2.3 When climbing up the upgrade with full load
If the bucket is full with material, should be positive upgrading the slope and reverse downgrading
the slope, to avoid tiping accident.(as shown in figure 23
态
24)
Figure 23 UPGRADE WITH FULL LOAD

Related product manuals