LORCH MicorMIG Series User Manual

page 9
Synergic selection panel
Since week 24 of 2018 new welding programs have been added to the new software version 2.12 including new
materials and 0.9mm wire. Thus the synergic selection panel were changed also.
wire feeder power source
Schematic synergic selection panel
2
3
4
5
6
1
1
keys
LEDs
Since May 2017 there are locking clips available to keep the at ribbon cables xed at the front panels and pre-
vent a disconnection from the at ribbon socket at the PCBs.
773.0020.2 773.0021.2

LORCH MicorMIG Series Specifications

General

Brand	LORCH
Model	MicorMIG Series
Category	Welding System
Language	English