10 Operating the Pump
This graphic displays the front LED indicators of the PS2 con-
troller. For a detailed description of the LED status indication
please refer to „10.1 LED Status“ on page 65.
The on/off switch is located at the bottom of the controller.
POWER SWITCH (ON/OFF)
WARNING – The switch only switches
pump operation ON/OFF, it is not a
disconnect switch.
When switched OFF/ON during operation, it resets the system.
System status indicator
Pump status indicator
Source low indicator
Remote switch indicator
Local communication indicator
64 Operating the Pump
To Next Page
Loading...
Need help?
General
