2. Optimizing face and mask detection accuracy
• Install in a bright area and avoid facing direct sunlight with strong backlights and dark shadows.
• Choose a location where objects of interest will be no further than 15ft (4.5m) from the camera.
• Position the camera 10ft (3m) off the ground to detect the full proportion of a face.
• Angle the camera around 15° down from the level position.
• Point the camera directly where objects of interest will be facing.
7
10ft
15° down
15ft
6
ATTENTION: Facial recording without consent is illegal in
certain jurisdictions. Lorex Technology does not assume liability for
any use of its product that fails to conform with local laws.
To Next Page
Loading...
