Need help?Do you have a question about the Lorex E893AB Series and is the answer not in the manual?
General| IR Cut Filter | Yes |
|---|---|
| Two-Way Audio | No |
| Motion Detection | Yes |
| Mobile App | Lorex Home |
| Image Sensor | CMOS |
| Night Vision | Yes, up to 100ft |
| Operating Temperature | -22°F to 140°F (-30°C to 60°C) |
| Connectivity | Ethernet |
| Storage | NVR |
Guidelines for camera placement to optimize detection of people and vehicles.
Guidelines for camera placement for accurate face and mask detection.
Factors influencing face detection accuracy and optimal conditions for performance.
How to configure and use the mask detection feature for alerts.
Pre-installation checks and decisions for camera mounting location and cable routing.
Detailed steps for mounting the camera, including drilling and adjustment.
Procedure for connecting the camera directly to the NVR's PoE ports.
Procedure for connecting the camera via a PoE switch or network router.
How to enable and configure automatic warning light settings from the NVR.
Instructions for manually activating the warning light and siren via app or NVR.
Troubleshooting steps for camera connection and signal loss issues.
Addresses resolution, too bright, or too dark images.
Troubleshooting night vision, bright spots, and image clarity.
Resolving problems with no audio and the two-way talk feature.
To Next Page