Need help?Do you have a question about the Lorex LW2770 SERIES and is the answer not in the manual?
General| Camera Type | Bullet |
|---|---|
| Wireless Technology | 2.4 GHz Wi-Fi |
| Motion Detection | Yes |
| Series | LW2770 |
| Audio | 2-way audio |
| Storage | MicroSD card, Cloud |
| Connectivity | Wi-Fi |
| Image Sensor Type | CMOS |
General safety precautions for operating and using the product and accessory equipment.
Instructions and warnings related to the safe installation of the product.
Guidelines for servicing the product, emphasizing qualified personnel.
Guidelines for the proper and safe use of the product.
Tips for planning camera placement, routing cables, and checking signal.
Recommended configurations for mounting cameras on walls or ceilings.
Positioning the receiver antenna for optimal signal reception.
Optional installation of the rechargeable battery for portable use.
Connecting the power adapter and powering on the receiver unit.
Inserting the SD card into the receiver for video storage and formatting.
Identification of ports and buttons on the rear panel of the receiver.
Identification of controls and indicators on the side panel of the receiver.
Accessing and viewing the system's firmware version details.
Explanation of icons and indicators on the live view display.
Instructions for navigating the system's menu and confirming settings.
Description of available viewing modes: Single, Quad, Auto Sequence, Scan.
Viewing up to four cameras simultaneously in Quad mode.
Automatically cycling through connected channels in full-screen view.
Using the digital zoom feature to get a closer look at the camera feed.
Enabling and using the two-way audio communication feature.
Adjusting the two-way audio volume on the receiver.
Procedure for formatting the SD card prior to initial recording.
Setting up continuous recording between selected start and stop times.
Steps to create a new recording schedule for continuous or motion recording.
Manually stopping scheduled recording before the scheduled end time.
Procedure for modifying existing or deleting recording schedules.
Manually starting and stopping recording on any camera.
Configuring the system to record only when motion is detected.
Enabling motion recording and prerequisites for its operation.
Setting the duration for recording after a motion event is detected.
Adjusting the sensitivity of video motion detection for each camera.
Selecting video resolution (HD or VGA) for recordings.
Managing SD card space by enabling or disabling automatic file overwrite.
Procedure for playing back recorded video files from the SD card.
Explanation of the controls used for video playback.
Steps to delete recorded video files directly from the system's SD card.
Viewing recorded video files on a computer using an SD card reader.
Instructions for playing back ASF video files on a PC.
Instructions for playing back ASF video files on a Mac.
Setting the time zone and enabling/disabling Daylight Savings Time.
Selecting the preferred display language for the system.
Restoring the system to its original factory default settings.
Adjusting the anti-flicker mode to avoid video flicker issues.
Configuring dynamic (DHCP) or static IP addressing for the receiver.
Viewing the system's current network information.
Prerequisites for using the mobile app to view the system.
Instructions for setting up and using the Lorex SD Pro app on iOS devices.
Initial setup steps for connecting the receiver and app on iOS.
Viewing live video feeds from cameras using the iOS app.
Reviewing motion-based events and video recordings via the iOS app.
Changing the remote access password for the system on iOS.
Adjusting the time interval between motion alerts on iOS devices.
Configuring video quality for live feeds on iOS devices.
Sharing camera snapshots via email from the iOS app.
Instructions for setting up and using the Lorex SD Pro app on Android devices.
Initial setup steps for connecting the receiver and app on Android.
Viewing live video feeds from cameras using the Android app.
Reviewing motion-based events and video recordings via the Android app.
Changing the remote access password for the system on Android.
Viewing camera snapshots taken using the Android app.
Adjusting the time interval between motion alerts on Android devices.
Configuring video quality for live feeds on Android devices.
Technical details for transmission frequency, power, data rate, and range.
Detailed specifications for the camera's image sensor, resolution, and IR LEDs.
Detailed specifications for the receiver's display, resolution, and power.
Importance of a clear line-of-sight between camera and receiver for signal strength.
Factors that can limit wireless signal range, such as solid objects.
Compliance information regarding FCC regulations and RF exposure.
Compliance information regarding Industry Canada regulations.
Consequences of unauthorized modifications to the device.
Product compliance with the European Union Restriction of Hazardous Substances.
To Next Page
