Using the Mobile App19
6. Snapshot: Tap to take a snapshot of the current video display. You can also share
snapshots via e-mail. See 19.2.7 Sharing Snapshots, page 57.
7. Mute: Tap to mute or unmute sound from the current camera.
8. Intercom: Tap to enable two-way audio with the currently selected camera. Tap again
to disable or listen for a response.
19.2.3 Event Log
If you have enabled motion recording on the system, use the event log to review motion-
based events. Each event is stamped with the date and time when the event took place,
as well as the camera that captured the event. These events are uploaded from the memo-
ry card inserted into the receiver. If the memory card is removed, the events will not be
accessible.
NOTE
Date and time stamps are created using the date and time on your smartphone or tablet and not the
receiver.
To open the event log:
1. Tap
.
2. Tap the UID for the device.
A list of events appears from the last half day. If you wish to view an event which took
place prior to the current date, use the search feature detailed below.
3. Tap an event to preview the video recording.
#LX400069; r.28523/28523; en-US
53
To Next Page
Loading...
Need help?
General
