Using the System
7
7.3 Navigating Menu Screen
Use the system menus to configure settings.
• To open the main menu, tap located at the lower right corner of the screen.
• Tap on each menu option to open its settings.
• Tap
to confirm / save settings and return to live view mode.
• Tap
to go back to the previous screen.
7.4 Viewing Modes
There are four different viewing modes available on the system: single channel viewing,
Auto Sequence Viewing mode (view individual channels automatically in sequence), Quad
mode, and Scan mode (for details, see 11 Scan Mode, page 38).
To change viewing modes:
• Tap
located at the lower left corner of the screen to switch between Quad mode
(half-Quad mode when only 2 cameras are connected), single channel viewing mode,
and Auto Sequence viewing mode.
OR
• In live view (Quad / Half-Quad mode), tap on a channel to open it in single-channel view
mode. Tap on the screen again to return to Quad / half Quad mode.
NOTE
Depending on the number of cameras packaged with the system, half-Quad mode (2 cameras) or single-
channel viewing (1 camera) is enabled when you first power on the system.
#LX400069; r.28523/28523; en-US
17
To Next Page
Loading...
Need help?
General
