Setting the Time
8
It is highly recommended to set the date and time on the system prior to recording, be-
cause it is used to stamp recordings. You must set the correct date and time in order to
use scheduled recording.
To set the time:
1. Tap
located at the lower right corner of the screen to open the main menu.
2. Go to General Settings > System Settings > Date & Time.
3. Tap each value to move the cursor; tap the up arrow icon (
) or the down arrow icon (
) to change the year, month, day, hour, and minutes.
NOTE
The system uses a 24-hour clock only.
#LX400069; r.28523/28523; en-US
20
To Next Page
Loading...
