16
To manually activate the warning light and/or siren features:
Prerequisite:
1. Launch the Lorex app and tap your NVR to view connected channels.
2. Tap a connected smart deterrence camera to open it in single-channel view.
3. Tap to activate the warning light, or tap to activate the siren.
To activate deterrence features on all connected cameras, push and hold the front panel
panic button on the NVR for 3 seconds.
17
Note: For full instructions on using the deterrence features, refer to the NVR’s manual on
your product page at lorex.com.
Manually activate deterrence features
To Next Page
Loading...
Need help?
General
