14
Using deterrence features
To enable the automatic warning light from the NVR:
1. From the camera’s live view, right-click and then click Main Menu.
2. Enter the system user name (default: admin) and password.
3. Click EVENTS > Event Settings > Motion > Smd/Deterrence.
4. Under Camera, select the channel connected to the smart deterrence camera.
5. Check Person and/or Vehicle to enable each type of smart detection.
6. Click Set > Area under each detection type you have enabled to set the active areas.
7. Click Set > Schedule to set the weekly schedule.
15
Automatic deterrence settings
To Next Page
Loading...
Need help?
General
