Replacing the Hard Drive (LH160 Series)
24
4. Connect the power and data cables.
5. Replace the DVR cover. Replace the side and cover panel screws.
24.2.2 24–Channel
WARNING
Make sure that the power cable has been disconnected before changing the hard drive.
1. Remove the screws from each side panel (x2) and rear panel (x4) of the cover.
2. Gently slide the cover away from the rear panel and lift off. Be careful of sharp edges.
#LX400007; r. 1.0/12121/12123; en-US
143
To Next Page
Loading...
