Lorex LH160 ECO6 SERIES - 5 Rear Panel (LH160 Series)

Rear Panel (LH160 Series)
5
8–Channel
0
0
0
0
0
00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
2
0
0
0
3
0
12
0
4
0
1
1
0
1
0
0
9
0
8
0
0
0
0
5
0
0
0
6
0
0
0
7
12–Channel
0
0
0
0
0
00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
2
0
0
0
3
0
12
0
4
0
1
1
0
1
0
0
9
0
8
0
0
0
0
5
0
0
0
6
0
0
0
7
16–Channel
0
0
0
0
0
00
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
2
0
0
0
3
0
12
0
4
0
1
1
0
1
0
0
9
0
8
0
0
0
5
0
0
0
6
0
0
0
7
1. Video Input: Connect BNC cameras.
2. Video Output: Outputs the DVR interface to a BNC connection. This allows you to see
your mouse cursor and have full control of the system on a secondary monitor. To
switch the mouse and system interface between BNC and VGA/HDMI monitors, press
0 three times on the remote control.
Note
Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
3. Audio Input: Input for RCA audio-enabled cameras (not included).
4. VGA: Connect a VGA monitor (not included) to view the system interface.
5. RS485/Alarm Block: Connect compatible PTZ cameras (not included) or alarm sen-
sor devices (not included).
6. IR EXT: Service only; not supported.
#LX400007; r. 1.0/12121/12123; en-US
7