To activate deterrence features on all connected cameras, push and hold the front panel
panic button on the NVR for 3 seconds.
18
Note: For full instructions on using the deterrence features, refer to the NVR’s manual on
your product page at lorex.com.
To manually activate the warning light and/or siren features:
Prerequisite: Connect to your recorder using the Lorex Home app, see ‘Remote viewing’ pg.23.
1. Launch the Lorex Home app and tap your NVR to view connected channels.
2. Tap a connected smart deterrence camera to open it in single-channel view.
3. Tap to activate the warning light, or tap to activate the siren.
17
Using deterrence features (continued)
To Next Page
Loading...
