Lorex N844 Series User Manual

To use face detection and mask detection, you must rst enable these features in the smart plan
settings, see pg.14 for details.
15
Face detection — Mask detection
To congure face detection and mask detection settings:
1. From the camera’s live view, right-click and then click Main Menu.
2. Enter the system user name (default: admin) and password.
3. Click EVENTS > Event Settings > Face Detection.
4. Congure the following:
a. Under Camera, select the
channel you would like to
congure.
b. Enable face detection.
c. Set the Alarm Type to Mask
Detect. The Auto Response
checkbox is enabled by
default to remind a non-
mask wearer to: “Please
wear your face mask”.
d. Click Apply to save.
a
b
c
d

Lorex N844 Series Specifications

General

Brand	Lorex
Model	N844 Series
Category	Network Hardware
Language	English