Need help?Do you have a question about the Loring Falcon S15 and is the answer not in the manual?
General| Brand | Loring |
|---|---|
| Fuel | Natural Gas or Propane |
| Steam Generator Output | Not applicable |
| Temperature Range | Up to 500°F (260°C) |
| Model | S15 |
| Category | Coffee Roaster |
| Cooking Modes | Roasting |
| Control Interface | Touchscreen |
Describes document control and versioning details for the manual.
Explains the meaning of signal words used for hazards.
Defines the intended readers of the manual.
Lists other available documents for assembly and installation.
Identifies and illustrates the main parts of the roaster.
Shows components from the back, especially fans and motors.
Provides guidance on safely unpacking the roaster and its components.
Details crate dimensions, weight, and item list for uncrating.
Instructions on how to attach the roaster feet to the main unit.
Details the process of connecting the vacuum tube.
Explains how to reattach the cyclone to the roaster.
Details installing the purge gate air cylinder.
Instructions for connecting the gas mixer line.
Describes how to tighten fasteners for the cyclone connections.
Instructions for attaching water lines and high temperature cutoff switch.
Explains connecting the ignition wire for spark ignition.
Details wiring for the BCU ignition system.
Details wiring for the DSI ignition system.
Guides the installation of thermocouples into the stack.
Final connections for the cyclone.
Instructions for attaching the mini cyclone.
Guidance on moving the assembled roaster to its intended site.
Information about the tryer component and its use.
How to adjust the articulating arm of the operator's console.
Describes chaff barrel installation and roaster feet for leveling.
Guidance on obtaining and preparing the compressed air supply.
Outlines tasks for final roaster installation and utility connections.
Details hookups for compressed air, natural gas/propane, and water.
Instructions for connecting the hot air exhaust vent.
Instructions for connecting the cooling air exhaust vent.
Details power cable inlet and local area network (LAN) inlet.
Outlines actions after assembly, including scheduling commissioning.
Provides contact details for Loring Smart Roast, Inc. and customer support.
To Next Page
