Loup Electronics Elite YIELD MONITOR User Manual

LOUP ELITE YIELD MONITOR
•
OPERATION MANUAL
2
Service and Technical SupporT
Contact: Loup Electronics Inc.
Address: 3030 N. 40TH St.
Lincoln, NE 68504
Phone: 877-489-LOUP(5687)
402-464-7131
Fax: 402-464-7104
E-mail: info@loupelectronics.com
TaBle oF conTenTS
AfTER HOuRs/WEEkEND suppORT:
402-318-6415
or
402-853-6249
1.0 sYsTEM OvERvIEW .................3
1.1 INITIAL fIRsT-TIME sETup ............3
1.2 OpERATION CHECkLIsT ..............3
2.0 MAIN sCREEN fuNCTIONs ............4
2.1 Live Yield ..........................................4
2.2 Header Width Reduction ............................4
2.3 Live Test Weight ....................................4
2.4 Reset Load/ADD LOAD .............................4
2.5 Custom Displays 1 and 2 .............................4
2.5.1 Resetting Displays .................................4
2.6 Field Area .........................................4
2.7 Field Average ......................................4
2.8 Live Moisture/Ave. Moisture .........................4
2.9 Combine/Speed ....................................4
2.10 Farm/Field ........................................4
2.11 Crop/Variety ......................................5
2.12 Tasks and Task Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.0 TAsks & LOggINg ..................5
3.1 Entering a Task Name ...............................5
3.2 Farm & Field Names ................................5
3.3 Crop & Variety .....................................5
3.4 Starting a Task .....................................5
3.5 Stopping a Task ..................................... 5
3.6 Load a Previous Task ................................6
3.7 Climate Fieldview ...................................6
4.0 YIELD NuDgE/CAL ..................6
4.2 LOAD Nudge (Load MANAGEMENT ON) ............7
5.0 CROp DETAILs .....................8
5.1 Cal number .......................................8
5.2 Standard Density ...................................8
5.3 Header Width ......................................8
5.4 Sections 8
5.5 Auto Width Reset ...................................8
5.6 Set the Cutout Height ...............................8
5.7 % Moisture Correction ..............................8
5.8 Standard Moisture ..................................8
5.9 Gain & Osets .....................................8
5.10 High & Low Moisture Limits ........................8
5.11 Moisture On/O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.0 COMbINE sETup. . . . . . . . . . . . . . . . . . . .9
6.1 Make ...........................................9
6.2 Model ...........................................9
6.3 Header Switch/Sensor ...............................9
6.3.1 HEADER PULL Switch ............................9
6.3.2 VARIABLE HEIGHT Sensor ........................9
6.4 Speed Source .......................................9
6.4.1 GPS Receiver .....................................9
6.4.2 Sha Speed .......................................9
6.4.3 Wheel Pulses Per 400 ............................10
6.4.4 Speed Calibration .................................10
6.5 Grain Loss .........................................10
7.0 gps sETTINgs .....................10
7.1 GPS Baudrate ......................................10
7.2 GPS Osets ........................................10
7.3 GPS Speed Correction ...............................10
7.4 GPS Status .........................................10
8.0 YIELD sENsOR sETTINgs ............10
8.1 Set Tare 10
8.2 Yield Smoothing ...................................11
8.3 Yield Delay ........................................11
8.4 Load Management ..................................11
9.0 ADvANCED YIELD sETTINgs ..........11
9.1 Line Points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.2 Auto Cal ...........................................11
9.2.1 Auto Cal Procedure ...............................11
10.0 ANgLE sENsOR sETTINgs ...........12
11.0 DIAgNOsTICs .....................12
12.0 DIspLAY sETTINgs .................12
12.1 Brightness ........................................12
12.2 Volume ..........................................12
12.3 Units 12
12.4 Date & Time ......................................12
13.0 sYsTEM upDATE ..................13
13.1 Update App .......................................13
13.2 Unlock Drill App ..................................13
13.3 Switch to Drill ..................................... 13
13.4 Factory Reset .....................................13

Loup Electronics Elite YIELD MONITOR Specifications

General

Brand	Loup Electronics
Model	Elite YIELD MONITOR
Category	Measuring Instruments
Language	English