22
23
Sonar operation | HOOK X series
Sonar operation | HOOK X series
When the unit is in manual mode, you may not
receive any depth readings, or you may receive
incorrect depth information.
Fishing mode
Enhances the performance of your
unit by providing preset packages
of sonar settings geared to specic
shing conditions. For more
information about shing modes,
refer to the Basic Operation section.
Reset shing mode
Resets selected shing mode to default settings.
That is useful when you want to clear settings
adjustments made while using a shing mode.
Installation
Keel offset
All transducers measure water depth from the
transducer to the bottom. As a result, water depth
readings do not account for the distance from
the transducer to the keel/bottom of motor or
from the transducer to the water surface. Before
setting keel oset, measure the distance from
the transducer to the bottom of the motor - see
illustration next page.
Installation menu
To Next Page
Loading...
