175
2. You must first fill in a street name in the First Street dialog box. Press
ENT
to display the Find By Name menu. There are two options: A. You
can spell out the street in the top selection box. Press ↑ or ↓ to change
the first letter, then press → to move the cursor to the next letter and
repeat until the name is correct, then press
ENT
|
ENT
. B. Or you can
jump down to the lower box and pick a street from the selection list.
Press
ENT
, then press ↓ or ↑ to select a street from the list and press
ENT
.
Find Street By Name menu. Spell out name in
the top box, or select from the list in the lower box.
3. The Find Streets menu reappears with the street you're searching for in
the First Street box. (In this example, it's 80th Street.) To search for that
street, press ↓ to
F
IND
F
IRST
S
TREET
|
ENT
. A message appears asking you to
wait while the unit finds the street. When the Streets Found list appears,
press ↑ or ↓ to select the street you are searching for and press
ENT.
At left, the Find Streets menu with the Find First
Street command highlighted. At right, Streets Found list.
4. The Map Page appears, with the cursor pointing to the found street.
To Next Page
Loading...
Need help?
General
