LRS SCINTREX AUTOGRAV CG-6 User Manual

Setting up
CG-6 Operation Manual p/n 115370001 Rev A
3—4
Figure 3-5 The backlight screen
The backlight can be set to On or Off. Move your cursor to either 1 or 2 and press the
Enter button.
To exit this screen, move the cursor to CANCEL and press the Enter button.
Adjusting the buzzer volume
The volume of the buzzer can be set to either low, medium, high or disabled. To adjust
the volume, move the cursor to Sound and press the Enter button. The following screen
will appear:
Figure 3-6 The buzzer volume screen
Move your cursor to either 1, 2, 3 or 4 and press the Enter button.
To exit this screen, move the cursor to CANCEL and press the Enter button.
Adjusting the window size of the level screen
To edit the window size of the level screen, move the cursor to Level Window and press
the Enter button. The following screen will appear:

LRS SCINTREX AUTOGRAV CG-6 Specifications

General

Brand	LRS
Model	SCINTREX AUTOGRAV CG-6
Category	Measuring Instruments
Language	English