LS ELECTRIC LSLV-G100 Series - Inverter Parameters; PROFIBUS-DP Communication Parameter List

Inverter Parameters
11
4 Inverter Parameters
4.1 PROFIBUS-DP Communication Parameter List
Code
Number
Parameter
Name
Default
Setting
Range
Description
CM-06
FBus S/W Ver
-
-
Indicates the version of the communication
module installed to the inverter.
CM-07
FBus ID
1
1–125
Sets up the station ID for the PROFIBUS-
DP communication module.
CM-09
FBus Led
-
-
Shows the LED status on the PROFIBUS-
DP Communication module.
CM-30
ParaStatus
Num
3
0–8
Set up the number of Status for use.
CM-31
Para Status-1
0x000A
0–0xFFFF
Set up the Status address to be read by
the master device.
CM-32
Para Status-2
0x000E
0–0xFFFF
CM-33
Para Status-3
0x000F
0–0xFFFF
CM-34
Para Status-4
0x0000
0–0xFFFF
CM-35
Para Status-5
0x0000
0–0xFFFF
CM-36
Para Status-6
0x0000
0–0xFFFF
CM-37
Para Status-7
0x0000
0–0xFFFF
CM-38
Para Status-8
0x0000
0–0xFFFF
CM-50
Para Ctrl Num
2
0–8
Set up the number of Control for use.
CM-51
Para Control-1
0x0005
0–0xFFFF
Set up the address for the Controls to be
controlled by the master device.
CM-52
Para Control-2
0x0006
0–0xFFFF
CM-53
Para Control-3
0x0000
0–0xFFFF
CM-54
Para Control-4
0x0000
0–0xFFFF
CM-55
Para Control-5
0x0000
0–0xFFFF
CM-56
Para Control-6
0x0000
0–0xFFFF
CM-57
Para Control-7
0x0000
0–0xFFFF
CM-58
Para Control-8
0x0000
0–0xFFFF
CM-68
FBus Swap Sel
0
0–1
0 : NO 1 : Swap
CM-94
Comm Update
0
0: NO
1: YES
Update keypad parameters related to
network communication.
Table 7 Inverter Parameters