LS SV-iS7 Series - Parameter Status and Control Configuration

iS7 Ethernet Option Manual
13
(5) Ethernet Speed (COM-22)
Ethernet speed is fixed to 0 without any setting and it is automatically
set to 100Mbps.
(6) CIP Input Instance(COM-23)
This parameter required for EtherNet/IP protocol communication the
format of the inverter state data which are sent by the inverter to the
Client (Originator) during the I/O communication of CIP (Common
Industrial Protocol). See the Assembly Object section of the EtherNet/IP.
Set
Value
Input Instance
Data Size
The number
or Parameter
0
70
4
X
1
71
4
X
2
110
4
X
3
111
4
X
4
141
2
1
5
142
4
2
6
143
6
3
7
144
8
4
8
145
10
5
9
146
12
6
10
147
14
7
11
148
16
8
(7) CIP Output Instance(COM-24)
This parameter required for EtherNet/IP protocol communication the
format of the inverter reference data which are sent by the Client
(Originator) to the inverter for inverter control during the I/O
communication of CIP (Common Industrial Protocol). See the Assembly
Object section of the EtherNet/IP.