LS SV-iS7 Series - Supported Object: AC Drive Object

iS7 Ethernet Option Manual
36
Drive Fault Reset
At 0  1 (FALSE  TRUE), the Drive Fault Reset gives TRIP RESET
reference to Inverter. Overwriting 1 (TRUE) on 1 (TRUE) does not
generate RESET reference to the Inverter trip. To send RESET
reference from Option to Inverter in 1 (TRUE) status, write 0 (FAULT)
and then write 1(TRUE) again.
 Service
Service
Code
Definition
Support
for Class
Support
for Instance
0x0E
Get Attribute Single
No
Yes
0x10
Set Attribute Single
No
Yes
④ AC Drive Object (Class 0x2A, Instance 1)
 Attribute
Attribute
ID
Access
Attribute
Name
Range
Definition
3
Get
At Reference
0
Means that the output
frequency has not
reached the set up
frequency, yet.
1
Means that the output
frequency has reached
the set up frequency.
4
Not
suppor-
ted
Net Reference
-
-
6
Get
Drive Mode
(Note1)
0
Vendor Specific Mode
1
Open Loop
Speed(Frequency)
2
Closed Loop Speed
Control
3
Torque Control
4
Process Control (e.g. PI)