Electrical and Environmental Specifications 3-19
Version 1.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
3.2.2 Thermal and Atmospheric Characteristics
The atmospheric characteristics for the LSI PCIe to SAS host adapters
are:
• Temperature range: 0 ˚C to 60 ˚C (dry bulb)
• Relative humidity range: 5% to 90% non-condensing
• Maximum dew point temperature: 32 ˚C
The following parameters define the storage and transit environment for
the LSI PCIe to SAS host adapters:
• Temperature range: −45 ˚C to +105 ˚C (dry bulb)
• Relative humidity range: 5% to 90% non-condensing
3.2.3 Safety Characteristics
All LSI PCIe to SAS host adapters meet or exceed the requirements of
UL flammability rating 94V-0. Each bare board is marked with the
supplier’s name or trademark, type, and UL flammability rating. Because
these boards are installed in a PCI Express bus slot, all voltages are
below the SELV 42.4 V limit.
To Next Page
Loading...