LSIS iXP Series - Page 11

Chapter 1. General Introduction
1-2
The user manual’s configuration is as follows.
Sequence
Category
Contents
Chapter 1
General Introduction
It describes this manual’s configuration, product’s feature and term.
Chapter 2
System Configuration
It describes feature and system configuration of each XGT Panel.
Chapter 3
Standard Specification
It describes XGT Panel’s general and function specification.
Chapter 4
System Configuration
It describes XGT Panel’s system configuration.
Chapter 5
Diagnostics
It describes XGT Panel’s self-diagnosis.
Chapter 6
Viewing information of
PLC Connection Status
It describes the way on connection status information of PLC which is
connected with XGT Panel.
Chapter 7
Transmission of Project
from USB Storage Device
It describes the way to execute the project by using USB/SD
storage device.
Chapter 8
XGT Panel S/W Update
It describes the way to update engine at XGT Panel.
Chapter 9
Backup files by using
Storage Devices
It describes the way to backup recipe, logging and etc. files by using
storage devices.
Chapter 10
Installation and Wiring
It describes an installation, wiring and caution for reliability of PLC system.
Chapter 11
Maintenance
It describes inspection category and method for long normal operation of PLC
system.
Chapter 12
EMC Standard
It describes system configuration for EMC standard.
Appendix 1
Troubleshooting
It describes a variety of error contents and measure.
Appendix 2
Dimension
It describes the dimension of XGT Panel.
Appendix 3
Warranty and
Environment Policy
-
Remark
This manual doesn’t describe connection with XP-Builder and PLC. For their own function, Please refer to the related
manuals.