Chapter 4. System Configuration
4.1 Touch Calibration
When the location is not recognized in XGT Panel, Touch’s scale can be adjusted in XGT Panel. If you press [Touch Calibration]
button in System Configuration, the setting screen shows up. If you press five ‘+’ marks, XGT Panel’s touch location adjustment is
completed.
It is possible to change the option of [Touch Sensitivity] Low or High. The high option is more sensitive than Low. But if you choose
more than two points, it will cause the equipment malfunction.
(1) XGT Panel’s Touch Calibration setting is basically set. If Touch location is way off, adjusting menu with touch can be hard
through touch. In that case, You can select the Touch Calibration setting menu by USB mouse or simply touch
5 times at the empty space on the main screen.
(2) When touch location changes in using, redo touch setting.
(3) If you don’t allow Multi-touch, sensitivity is lower than when allowing Multi-touch.
To Next Page
Loading...