LSIS iXP Series - System Configuration

Chapter 2 System Configuration
2-2
No
Name
Description
○
1
Power status LED
Indicating the state of device (On: Green)
○
2
USB Device
1) Logging/Recipe/Screen Data Backup
2) Send project data and XP-Run time
3) Receive back data and project file
○
3
USB Interface
Composed of three ports (Front side 1 port, Lower end 2 ports)
1) USB Memory Connection: Backup of data such as alarm/logging/recipe
and storage of screen data
2) USB Memory Connection: Send/Receive project data, Send XP-Runtime
3) User’s Interface Connection: Using mouse/keyboard
4) Printer connection: Printing function
○
13
○
4
Power Terminal Cover
Prevention from electric shock
○
5
Extended Interface
Communication, I/O Option Module 3 Units Mounted  Optional board to
be developed later
○
6
Reset Switch
Hardware Reset Switch
○
7
RS-422/485 Terminating
Resistance Switch
RS-422/485 Terminating Resistance On/Off  See Communication Instruction
Manual 2.5.1 Switch
○
8
SD Card Interface
1) Backup of data such as alarm/logging/recipe and storage of screen
data
2) Send/Receive project data, Send XP-Runtime
3) Window CE OS Update Function (Can be used with DIP S/W set)
○
9
Audio Output
1 channel Audio Output
○
10
RS-422/485 Connector
RS-422/485: PLC or Control Device Communication
○
11
RS-232C Connector
RS-232C: PLC or Control Device Communication
○
12
Ethernet Terminal
Ethernet: 10Base-T / 100Base-TX
1) Send Project Data
2) Receive backup data and project file
3) Send XP-Runtime
4) PLC/Control Device Communication
○
14
Power Terminal
Composed of Power Input and FG Terminal
○
15
Panel Mounting Part
Fixing XGT Panel on the panel using bracket