Chapter 7. Storage Function
7.5 Select a USB Storage Device
1. When multiple USB devices are connected to the XGT Panel, you must select a device for
uploading, downloading, or backing up projects. You can change your selection at any point
during a project.
To select a USB storage device:
In the XGT Panel main menu, touch[Storage Function], then Touch [Select USB]
2. Select device from the list of connected devices
- Use: The selected device is indicated with an asterisk(*).
- Vendor Name: The device manufacturer
- Product Name: The device name
- Up/down: Move to the next or previous item
- Select: Save your selection
- Cancel: Exit without saving changes
To Next Page
Loading...