Chapter 10. Installation and Wiring
<Source: IEC60529>
(2) Caution
1) The XGT Panel is designed to mount on the panel, so that the front side meets the standard. However,
it does not guarantee the installation environment.
2) The product may malfunction or break down if the installation environment is not suitable for the protection rating.
3) The standard is only for protection from dust and water. Use care to protect against oil, corrosives, or metal particles.
4) If the gasket breaks down due to exposure to chemicals or continuous vibration, the protection from dust and
water may be weakened.
5) When you install or mount the XGT Panel, be careful not to damage the product.
10.1.2 Notice in handling
It describes the notice from opening to installation.
Do not drop or cause heavy impact.
Do not disassemble voluntarily. When doing this, we are not responsible for the product.
When wiring, be careful that the remains do not enter into XGT Panel.
To Next Page
Loading...