Chapter 7. Storage Function
7.3 Uploading Project through the Storage Equipment
1. If you touch [Project Upload], the following dialog shows.
2. Please select the targeted external memory in “Select Source”. Following path is indicated depending on the selected
external memory
- USB: \USB Storage\XP_Backup\
- SD: \SD Storage\XP_ Backup\
3. If you touch [OK] button, project backup file is transmitted to the selected path.
4. The project backup file is saved when Download project backup file is selected when downloading the project.
If you don’t select, project backup file is not saved in the device and transmission to the storage equipment is not
available.
To Next Page
Loading...