Chapter.7 Storage Function
7.4 Updating the Device through Storage Equipment
1. If you touch [Project Upload], the following dialog shows.
2. Please select the targeted external memory in “Select Source”. Following path is indicated depending on the selected
external memory
- USB: \USB Storage\XP_Software\
- SD: \SD Storage\XP_ Software\
In case of updating the device by using storage equipment, the XGT Panel Software project should be saved in the
one lower directory between those two directories.
3. If you touch [OK] button, the device is updated with XGT Panel Software in the designated path.
To Next Page
Loading...