LSIS iXP Series - Chapter 7 Storage Function; General Introduction

To Next Page

To Previous Page

Chapter 7. Storage Function

7-1

Chapter 7 Storage Function

7.1 General Introduction

Downloading the user project made in XP-Builder from PC, uploading the project stored in the device to PC, updating the device

and etc are available through connection with XGT Panel with Serial cable or Ethernet cable generally. However, when those

connections are not available, you can use SD card and USB storage equipment

1. If you touch [Storage Function], the following dialog box shows.

2. In case of downloading the project by using SD card or USB storage equipment, touch [Project Download] button.

3. In case of transmitting the project data stored in the device to SD card or USB storage equipment, touch [Project Upload]

button.

4. In case of updating the XGT Panel with XGT Panel Software stored in SD card or USB Storage equipment, touch [XGT

Panel Update]