Chapter 1. General Introduction
(c) Various communication connectors are placed at the lower side so that it can be connected in a variety of types with the
control device such as PLC, inverter, etc. With two channels of USB HOST attached, it provides total 3 USB Hosts
including one channel at front side. This enables the user to diversely connect USB-based peripheral device that uses
mouse, key board, printer, etc. as well as for the purpose of backup.
Through RS-232C, RS-422/485, Ethernet (10Base-T /100Base-TX) communication, it can be connected with control
device.
(2) Based on Windows CE
(a) Adoption of Microsoft Company’s Windows CE
Windows CE 6.0
(b) Advantage
It provides stable software capacity by using Microsoft Company’s platform.
It can process diverse function simultaneously.
It provides diverse interface including Ethernet, USB and SD card.
The user interface including mouse and keyboard can be connected.
It has high flexibility like computer software.
Fast reaction is available when adding new equipment.
Wide data sharing and management with upper system is available. (Later)
(3) Improvement of project transmission time
(a) It provides Ethernet which is faster than RS-232C.
USB HOST
- Data Backup (Alarm, Logging, Recipe, etc.)
- Project data storage (image, upload project, etc.)
- Mouse, keyboard and printer
Ethernet
- Project download through XP-Builder
- Control device that can be communicated such as PLC
- Connected with fieldbus and open network
RS-422/485
- Control device that can be communicated
such as PLC
RS-232C
- Control device that can be communicated
such as PLC
Audio output
- Connected with external speaker
To Next Page
Loading...