Chapter 9. File Backup through External Storage Equipment
(c) In case backup file is created at the same time in terms of second, index information at the end of file name increases.
3. Path structure in case of screen backup
(1) Directory named ‘Screen Image’ is created under USB/SD storage equipment root directory.
(2) Directory whose name is year; month is created under Screen Image directory.
(3) The lower directory structure is same as that of logging.
(4) Name of screen image backup file includes hour, minute, second information.
(a) Backup file is created in bitmap format.
(b) File name starts with ‘S’ and includes hour, minute, second, index information.
(c) In case backup file is created at the same time in terms of second, index information at the end of file name increases.
4. Structure of path at memo backup
(1) ‘Memo’ directory will be formed at the sub route directory of USB/SD storage device.
(2) Directory in the name of Year and Month will be formed below the Memo Directory.
(3) Structure of directory thereafter is same as that of logging backup route.
(4) Memo backup file has the name made of hour/minute/second when it was created.
(a) Backup file is created in the type of bitmap.
(b) File name starts with ‘M’ that represents the screen image, which includes the index information of hour, minute, and
second thereafter.
(c) In case backup file is created at the same time up to second, it increases the far end index information.
5. Structure of path at live image recording
(1) ‘Movie’ directory will be formed at the sub route directory of USB/SD storage device
(2) Recorded live image is stored below the Movie Directory.
(3) Live image file has the name made of year/month/date/hour/minute/second information when it was created.
(a) Backup file will be created in AVI type. H.264 and Mp3 were used for Video CODEC and Audio CODEC respectively.
(b) File name starts with ‘MOV’ that represents screen image, which includes data and hour information thereafter.
(c) Live image can be stored up to the number 1,000 files. This number can be designated at the special device settings of
XP-Builder.
6. Structure of path when Blue Screen of camera image and live image is created
(1) ‘MovieStill’ directory will be formed at the sub route directory of USB/SD storage device.
(2) Recorded live image will be stored below MovieStill directory.
(3) Blue screen image file has the name made of year/month/date/hour/minute/second information when it was created.
(a) Backup file will be created in JPG type.
(b) File name starts with ‘STL’ that represents screen image, which includes data and hour information thereafter.
(c) Live image can be stored up to 1,000 files. This number can be designated at the special device settings of XP-Builder.
(1) When changing device time, in case of changing current time into after time, we guarantee the normal operation. But in
case of changing current time into early time, we don’t guarantee the normal operation. In this case, you have to delete
directory including the changed hour and its lower directory for normal operation. For example, if you change time from
December 10
th
to December 5
th
, you have to delete year, month directory created in December 10
th
and restart the device
(2) Sorting by project is not supported for each logging, recipe, screen image. For example, there are no.1, 2, and 3 logging
groups in the project A. And in case each logging group backups the file, 1, 2, 3 directories are created and each data is
saved under each directory. Then, in case file backup occurs in the project B having no.1, 2 logging group, backup file is
created in same directory of project A. In this case, you have to sort the backup files of project A and B based on the
created time.
To Next Page
Loading...