LSIS SV008iC5-1 User Manual

1. Basic information and precautions
1-1
1. Basic Information and Precautions
1.1 Important Precautions
Unpacking
and
inspection
 Inspect the inverter for any damage that may have occurred
during shipping. To verify the inverter unit is the correct one for
the application you need, check the inverter type, output ratings
on the nameplate and the inverter is intact.
 Type of the inverter
SV 004 iC5 - 1 F
LS
Inverter
Motor rating
Series
Name
-
Input
EMI Filter
option
004 0.4 [kW]
Single
phase
standard
inverter
(200V)
1
Single
phase
F
Built-
in
Filter
008
0.75 [kW]
-
N/A
015
1.5 [kW]
022 2.2 [kW]
 Accessories
If you have found any discrepancy, damage, etc., contact your
sales representative.
Preparations
of
instruments
and parts
required for
operation
Instruments and parts to be prepared depend on how the inverter
is operated. Prepare equipment and parts as necessary.
Installation
To operate the inverter with high performance for a long time,
install the inverter in a proper place in the correct direction and
with proper clearances (Refer to 2. Installation, P 2-1).
Wiring
Connect the power supply, motor and operation signals (control
signals) to the terminal block. Note that incorrect connection may
damage the inverter and peripheral devices (Refer to 3. Wiring, P
3-1.).
Input power Rating
Inverter Capacity (HP/kW)
Inverter Type
Output Power Rating
Bar Code
Serial Number

LSIS SV008iC5-1 Specifications

General

Brand	LSIS
Model	SV008iC5-1
Category	DC Drives
Language	English